System Diagnosis
Hot Surface Igniter Open. The igniter is not functioning.
Lennox | Numeric Codes (Legacy)
Error Code 207
Troubleshooting guide for the Lennox Numeric Codes (Legacy) system fault 207.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Broken igniter, loose connection.
Verify Before Replacing Parts
- Confirm the exact Lennox model family and numeric codes (legacy) context before acting on a generic code description.
- Start with the exact model documentation and verify the full operating sequence before replacing parts.
- Use the listed causes as branches to confirm or eliminate with measurements, not assumptions.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
A consistent failure pattern that matches the code and can be tied to a measured condition.
What can fool you
Generic code text without model context can send you after the wrong component.
When to Escalate the Call
- The code behavior does not match the published description for the exact model.
- You have conflicting evidence across multiple branches and need model-specific escalation.
Diagnose with Confidence
Use the ACLogics AI assistant to walk through this error code step-by-step.
Included in Diagnosis Workflow
Ask
Upload nameplate & symptoms
Diagnose
AI isolates the likely numeric codes (legacy) branch behind code 207
Report
Document the verified result and next action