System Diagnosis
Failure of transmission (between indoor unit PCB and sub PCB)
Daikin VRV
Error Code C1
Troubleshooting guide for the Daikin VRV system fault C1.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Defective connection of the connector between indoor unit PCB.
Verify Before Replacing Parts
- Confirm the exact Daikin model family and vrv context before acting on a generic code description.
- Start with the exact model documentation and verify the full operating sequence before replacing parts.
- Use the listed causes as branches to confirm or eliminate with measurements, not assumptions.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
A consistent failure pattern that matches the code and can be tied to a measured condition.
What can fool you
Generic code text without model context can send you after the wrong component.
When to Escalate the Call
- The code behavior does not match the published description for the exact model.
- You have conflicting evidence across multiple branches and need model-specific escalation.
Diagnosing VRV across a fleet?
ACLogics standardizes commercial VRV diagnostics across your whole team — consistent steps, less guesswork on every call.