System Diagnosis
Malfunction of liquid pipe thermistor for heat exchanger
Daikin SkyAir
Error Code C4
Troubleshooting guide for the Daikin SkyAir system fault C4.
ACLogics Standardize SkyAir diagnostics See the commercial workflow → Standardize SkyAir diagnostics
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Defective thermistor for liquid pipe.
- Defective indoor unit PCB.
- Defective connector contact.
Verify Before Replacing Parts
- Confirm the exact Daikin model family and skyair context before acting on a generic code description.
- Verify the sensor or thermistor reading against the expected range for the current operating condition.
- Check the sensor harness and board connection before condemning the sensor itself.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Sensor values that do not match the operating condition or drift when the harness is moved.
What can fool you
A control board issue can look like a failed sensor if the reference voltage or connector is unstable.
When to Escalate the Call
- Sensor values remain unstable after connector and board checks.
- The model uses a proprietary sensor curve you cannot verify confidently in the field.
Diagnosing SkyAir across a fleet?
ACLogics standardizes commercial SkyAir diagnostics across your whole team — consistent steps, less guesswork on every call.