System Diagnosis
Blower Motor Fault (Normal Operation with Call for Heat). If alternating, it may indicate a different issue, but simultaneous slow flash often means normal operation or blower issue depending on model. Consult manual.
Lennox | LED Status Codes (DS1 & DS2)
Error Code Slow Flash / Slow Flash
Troubleshooting guide for the Lennox LED Status Codes (DS1 & DS2) system fault Slow Flash / Slow Flash.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Blower motor failure, control board issue.
Verify Before Replacing Parts
- Confirm the exact Lennox model family and led status codes (ds1 & ds2) context before acting on a generic code description.
- Confirm filter condition, blower operation, and coil cleanliness before replacing any controls.
- Measure airflow-related readings that match the symptom, such as temperature split or static pressure.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Weak airflow, abnormal temperature split, or repeated protective trips tied to blower performance.
What can fool you
Charge and control faults often look similar until airflow and coil condition are verified first.
When to Escalate the Call
- The code returns after airflow and cleanliness checks are corrected.
- You find evidence of duct or static issues that require a larger system review.
Diagnose with Confidence
Use the ACLogics AI assistant to walk through this error code step-by-step.
Included in Diagnosis Workflow
Ask
Upload nameplate & symptoms
Diagnose
AI isolates the likely led status codes (ds1 & ds2) branch behind code Slow Flash / Slow Flash
Report
Document the verified result and next action