System Diagnosis
High Pressure Switch Open. High-pressure switch is open; board indicates the event and retries after 15 minutes.
Bryant | Air Conditioners
Error Code 31
Troubleshooting guide for the Bryant Air Conditioners system fault 31.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Check refrigerant charge level.
- Inspect outdoor fan operation and coil for airflow restrictions or debris.
- Verify refrigerant charge is within specification.
- Clean condenser coil if dirty.
- Board retries after 15 minutes.
Verify Before Replacing Parts
- Confirm the exact Bryant model family and air conditioners context before acting on a generic code description.
- Verify airflow first, then confirm operating pressures and temperature relationship before adjusting charge.
- Look for restrictions, iced coils, or dirty heat-transfer surfaces that can mimic a charge problem.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Pressure and temperature readings that stay out of range after airflow is verified.
What can fool you
Dirty coils or airflow restrictions can look like a charge problem until the air side is cleaned up.
When to Escalate the Call
- You suspect a restriction, leak, or compressor issue that needs deeper system evaluation.
- The readings do not normalize after airflow and coil conditions are corrected.
Diagnose with Confidence
Use the ACLogics AI assistant to walk through this error code step-by-step.
Included in Diagnosis Workflow
Ask
Upload nameplate & symptoms
Diagnose
AI isolates the likely air conditioners branch behind code 31
Report
Document the verified result and next action