System Diagnosis
VDC Under Voltage Lockout. VDC under-voltage lockout active for 2 hours.
Bryant | Air Conditioners
Error Code 96
Troubleshooting guide for the Bryant Air Conditioners system fault 96.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Diagnose root cause of repeated VDC under-voltage faults.
- Check supply voltage and wiring.
- Inspect inverter board DC bus.
- Allow lockout to expire (2 hours) or power cycle after root cause is corrected.
Verify Before Replacing Parts
- Confirm the exact Bryant model family and air conditioners context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards.
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Loss of comm LEDs, incorrect polarity, or a fault that appears only when indoor and outdoor boards talk.
What can fool you
Board swaps without harness checks can hide the real fault if the wiring path is damaged.
When to Escalate the Call
- Communication faults persist after polarity, harness, and compatibility checks.
- A board replacement seems likely but the full system path has not been confirmed.
Diagnose with Confidence
Use the ACLogics AI assistant to walk through this error code step-by-step.
Included in Diagnosis Workflow
Ask
Upload nameplate & symptoms
Diagnose
AI isolates the likely air conditioners branch behind code 96
Report
Document the verified result and next action