System Diagnosis
Active call for cooling/heat (compressor running at capacity).
Trane AC and Heat Pump
Error Code Green LED (Medium Flash – 2x/second)
Troubleshooting guide for the Trane AC and Heat Pump system fault Green LED (Medium Flash – 2x/second).
ACLogics Fix Trane code Green LED (Medium Flash – 2x/second) See how ACLogics handles it → Fix Green LED (Medium Flash – 2x/second) step-by-step
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Normal operation.
Verify Before Replacing Parts
- Confirm the exact Trane model family and ac and heat pump context before acting on a generic code description.
- Verify current draw, overload status, and control signal before condemning the compressor or drive.
- Look for upstream conditions such as airflow or charge issues that may be pushing the compressor into protection.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Protection trips that line up with abnormal current draw, temperature, or drive behavior.
What can fool you
Upstream airflow or refrigerant issues can push the compressor into protection even when the compressor is healthy.
When to Escalate the Call
- The compressor or drive shows repeat protection events under normal load.
- You cannot separate compressor health from upstream system issues with confidence.
Not sure which system this Trane code is on?
ACLogics has guided diagnostics for 36 Trane fault codes and asks the right questions to narrow it down.
