System Diagnosis
Inverter VDC-Out Under Voltage Event. Inverter VDC output under-voltage event detected.
Bryant | Heat Pumps
Error Code 92
Troubleshooting guide for the Bryant Heat Pumps system fault 92.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Measure supply voltage at outdoor unit for undervoltage.
- Check for undersized wiring or loose connections.
- Inspect inverter board DC bus components.
- Contact utility if supply voltage is consistently low.
- Board retries after 15 minutes.
Verify Before Replacing Parts
- Confirm the exact Bryant model family and heat pumps context before acting on a generic code description.
- Confirm board LEDs, wiring polarity, and model compatibility before replacing control boards.
- Check for intermittent communication faults caused by connectors, moisture, or damaged harnesses.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Loss of comm LEDs, incorrect polarity, or a fault that appears only when indoor and outdoor boards talk.
What can fool you
Board swaps without harness checks can hide the real fault if the wiring path is damaged.
When to Escalate the Call
- Communication faults persist after polarity, harness, and compatibility checks.
- A board replacement seems likely but the full system path has not been confirmed.
Diagnose with Confidence
Use the ACLogics AI assistant to walk through this error code step-by-step.
Included in Diagnosis Workflow
Ask
Upload nameplate & symptoms
Diagnose
AI isolates the likely heat pumps branch behind code 92
Report
Document the verified result and next action