System Diagnosis
High Current Lockout. High-current lockout active for 2 hours.
Bryant Heat Pumps
Error Code 95
Troubleshooting guide for the Bryant Heat Pumps system fault 95.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
- Check supply voltage for proper level.
- Inspect compressor wiring for shorts.
- Test compressor winding resistance.
- Check for mechanical blockage in compressor.
- Diagnose root cause before resetting.
- Lockout clears after 2 hours.
Verify Before Replacing Parts
- Confirm the exact Bryant model family and heat pumps context before acting on a generic code description.
- Verify current draw, overload status, and control signal before condemning the compressor or drive.
- Look for upstream conditions such as airflow or charge issues that may be pushing the compressor into protection.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Protection trips that line up with abnormal current draw, temperature, or drive behavior.
What can fool you
Upstream airflow or refrigerant issues can push the compressor into protection even when the compressor is healthy.
When to Escalate the Call
- The compressor or drive shows repeat protection events under normal load.
- You cannot separate compressor health from upstream system issues with confidence.
Still unsure about this fault?
ACLogics walks you through Bryant Heat Pumps diagnostics step-by-step — so you confirm the cause before swapping parts.
