System Diagnosis
Low Line Voltage or No Line Voltage Fault.
Rheem | Default
Error Code 27
Troubleshooting guide for the Rheem Default system fault 27.
R
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
Verify Before Replacing Parts
- Confirm the exact Rheem model family and default context before acting on a generic code description.
- Start with line voltage, low voltage, and board output checks in sequence so the fault is isolated cleanly.
- Inspect connectors, relay outputs, and any recently replaced electrical parts for mismatch or loose fit.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Missing voltage, inconsistent outputs, or a fault that changes when a connector is reseated.
What can fool you
Intermittent power quality and field wiring problems can mimic a failed board.
When to Escalate the Call
- You have unstable supply power, repeated fuse failures, or signs of board damage.
- The failure path involves multiple boards or field-modified wiring.
Diagnose with Confidence
Use the ACLogics AI assistant to walk through this error code step-by-step.
Included in Diagnosis Workflow
Ask
Upload nameplate & symptoms
Diagnose
AI isolates the likely default branch behind code 27
Report
Document the verified result and next action