System Diagnosis
Internal Control Fault. The sensor detects an abnormally low or high outdoor ambient temperature. The control is not functioning properly.
Rheem Default
Error Code 93
Troubleshooting guide for the Rheem Default system fault 93.
Disclaimer: This information is for general reference. Error codes can vary by model and production year. Always refer to your machine's specific manual and the information printed on the unit itself.
Potential Causes & Solutions
Verify Before Replacing Parts
- Confirm the exact Rheem model family and default context before acting on a generic code description.
- Verify the sensor or thermistor reading against the expected range for the current operating condition.
- Check the sensor harness and board connection before condemning the sensor itself.
- After the correction, run the system long enough to confirm the code does not return under normal load.
Field Signals to Confirm
What usually confirms it
Sensor values that do not match the operating condition or drift when the harness is moved.
What can fool you
A control board issue can look like a failed sensor if the reference voltage or connector is unstable.
When to Escalate the Call
- Sensor values remain unstable after connector and board checks.
- The model uses a proprietary sensor curve you cannot verify confidently in the field.
Not sure which system this Rheem code is on?
ACLogics has guided diagnostics for 35 Rheem fault codes and asks the right questions to narrow it down.
