What It Means
- VHEC***S4-4P, VHTC***S4-4P: Error due to disconnected Thermal Fuse (When the temperature of terminal block is increases)
- V36C***S4-4P: Open circuit error of the thermal fuse
Lennox VRF / VRV
Lennox VRF / VRV Error Code E198
VRF / VRV
E198 means different things on different VRF / VRV models. Enter your model number to see only your reading, or find your model below.
Causes & actions from Lennox
Error due to disconnected Thermal Fuse (When the temperature of terminal block is increases)
Models: VHEC***S4-4P, VHTC***S4-4P
Hydro unit (indoor)
How it shows
- hydro main pcb display: E198
- hydro wired controller display: E198
This manual entry does not list further causes or actions.
Applicable models & manual sources
- VHEC***S4-4P
Error due to disconnected Thermal Fuse (When the temperature of terminal block is increases)
VHEC***S4-4P, VHTC***S4-4P
Open circuit error of the thermal fuse
Models: V36C***S4-4P
VRF indoor unit (indoor)
How it shows
- vrf 360 fault code: E198
- vrf 360 indoor indicator: ice_blue: flashing, yellow_green: off, blue: flashing, red: off (blue: flashing, ice_blue: flashing, red: off, yellow_green: off)
This manual entry does not list further causes or actions.
Applicable models & manual sources
- V36C***S4-4P
Open circuit error of the thermal fuse
Disclaimer: This information is for general reference. Code wording and instructions vary by model. Always follow the service manual for your exact unit.
What should you check next?
Continue in ACLogics with guided diagnosis for your equipment and symptoms.
