Lennox Split & Multi-Split

Lennox Error Code E353

Split & Multi-Split

E353 means different things on different Split & Multi-Split models. Enter your model number to see only your reading, or find your model below.

What It Means

  • CBX40UHV: Heat section / Stage 3 failed.
  • CBK48MVT: There is a problem with the air-handler's third stage electric heat. Either the pilot relay contacts did not close, or the relay coil in the electric heat section did not energize. The air-handler will operate on first stage electric heat until the issue is resolved.

Causes & actions from Lennox

Heat section / Stage 3 failed.

Models: CBX40UHV

Air handler (indoor)

How it shows
  • Single-character display: E353

This manual entry does not list further causes or actions.

Applicable models & manual sources

There is a problem with the air-handler's third stage electric heat. Either the pilot relay contacts did not close, or the relay coil in the electric heat section did not energize. The air-handler will operate on first stage electric heat until the issue is resolved.

Models: CBK48MVT

How it shows
  • Single-character display: E353

Heat section / stage 3 failed (same as code 351). Pilot relay contacts did not close, or the relay coil in the electric heat section did not energize. The air-handler will operate on stage 1 heat only. The alarm clears after sage 2 relay is detected.

Applicable models & manual sources
  • CBK48MVT

    There is a problem with the air-handler's third stage electric heat. Either the pilot relay contacts did not close, or the relay coil in the electric heat section did not energize. The air-handler will operate on first stage electric heat until the issue is resolved.

    CBK48MVT manual, page 52

Disclaimer: This information is for general reference. Code wording and instructions vary by model. Always follow the service manual for your exact unit.

What should you check next?

Continue in ACLogics with guided diagnosis for your equipment and symptoms.

See how guided diagnosis works →