What It Means
- 1.4 - On initial power up the combustion air blower does not energize. - Diagnostic lights flash normal power oonn operation. LED#1-Slow Flash LED#2-Slow Flash
Lennox Ducted Heating
Lennox Error Code LED#1-Slow Flash, LED#2-Slow Flash
Ducted Heating:
Causes & actions from Lennox
How it shows
- SureLight board LEDs (DS1/DS2): LED#1-Slow Flash, LED#2-Slow Flash (led1: flashing (slow), led2: flashing (slow))
Possible cause: 1.4.1 Open combustion air blower motor circuit. Corresponding action/comments: ACTION 1 − Check for 120V to combustion air blower. If no power, check wire and connec- tions. Possible cause: 1.4.2 Failed combustion air blower motor. Corresponding action/comments: ACTION 1 − If power is present at blower, replace blower.
Applicable models & manual sources
- G24M
1.4 − On initial power up the combustion air blower does not energize. − Diagnostic lights flash normal power oonn operation.. LED#1−Slow Flash LED#2−Slow Flash
Disclaimer: This information is for general reference. Code wording and instructions vary by model. Always follow the service manual for your exact unit.
What should you check next?
Continue in ACLogics with guided diagnosis for your equipment and symptoms.
